
Design visualization. Landscaping and paving are not included. Select the image to enlarge it.
See actual pages from the PDFFree + premium editions
4x6 Storage Shed Plans
A compact timber shed with double doors, clear gable vents and treated skids over gravel.
Actual footprint: 74 x 48 in
One design. Two levels of detail.
Free includes 10 selected build steps, using the same instructions and dimensioned images as premium. Premium includes the complete 21-step sequence, materials and cutting lists, tools, hardware and additional details.
| Included | Free | Premium |
|---|---|---|
| PDF pages | 15 | 30 |
| Illustrated build steps | 10 selected steps | All 21 steps |
| Dimensioned drawings and model views | Included | Included |
| Full materials and cutting list | Not included | Included |
| Tools list | Not included | Included |
| Fasteners and hardware list | Not included | Included |
| Additional construction and joint details | Not included | Included |
| Full-page lumber-size reference | Not included | Included |
| Technical support | Not included | Included |
| Structural / site-specific design | Not included | Not included |
Look inside the plan
These are selected pages from the actual free PDF. Select a page to enlarge it, or download the full free edition above.
Dimensions that match the drawing
- Structural floor frame
- 74 x 48 in
- Gravel pad
- 98 x 72 in; 6 in modeled compacted depth
- Skids
- Two nominal 6x6 runners, 74 in long, at 36 in centres
- Door rough opening
- 64 x 72 in
- Roof pitch
- 44 degrees
- Roof deck
- 82 x 48 in per slope; original finished-roof differences flagged
- Gable vents
- Two 12 x 12 in clear openings
- Revision
- October 25, 2026 / Combined step drawings, skid connections and vent details
Before you choose
- This is a digital PDF, not a materials kit or a finished product.
- Dimensions are shown in feet and inches.
- Not an engineered or permit-ready construction set. Foundation design, structural approval and verified load ratings are not included.
- Build time and material budget have not yet been verified in a physical build.
- Payhip handles payment and paid-file delivery. Keep your receipt email to recover your download.
- Personal project use, including sharing with your project tradespeople. No resale or public redistribution of the premium PDF.
What the 4x6 Storage Shed takes to build
35 material lines and 21 illustrated build steps, 10 of them in the free PDF. Quantities below are from the plan itself; the cut sizes for every part are in the premium edition.
Structure
| Part | Qty |
|---|---|
| Compacted gravel | 0.907 yd3 net |
| Separation fabric | To suit |
| Treated 6 x 6 skids | 2 |
| Screw-in anchors / L brackets | Per design |
| Treated 2 x 8 rim / joists | 2 / 7 |
| Joist-to-skid connectors | Per design |
| 9/16 in floor plywood | 1 |
| 4 x 4 wall corner posts | 4 |
| 2 x 4 wall studs / jambs | 14 |
| 2 x 4 long wall plates | 3 |
| 2 x 4 short front plates | 2 |
| 2 x 4 side plates | 4 |
| 2 x 4 header / cripples | 1 / 3 |
| 2 x 4 second top plates | 2 / 2 |
| 2 x 6 rafters | 12 |
| 1 x 8 ridge / 2 x 4 collars | 1 / 4 |
| 2 x 3 gable studs | 4 / 4 |
| Closure boards, 0.75 in thick | 10 |
| 9/16 in roof plywood | 2 |
Enclosure and finish
| Part | Qty |
|---|---|
| Wall plywood / weather barrier | To suit |
| Lap siding, 0.5 x 6 in | To suit |
| Side corners / rakes / bases | 4 / 4 / 2 |
| Front/back corner / base trim | 4 / 2 |
| Door casing, 0.75 x 2.25 in | 2 / 1 |
| Lower door trim | 1 |
| 2 x 4 door stiles / rails | 4 / 4 |
| 9/16 in door plywood | 2 |
| Door face trim, 2.5 in wide | 4 / 4 |
| Door hinges / pulls / bolts | 6 / 2 / 4 |
| Fascia, 0.75 x 7.25 in | 2 |
| Gable louver vents | 2 |
| Shingles / underlay | To product |
| Eave drip edge / ridge caps | + laps |
| Fasteners and flashing | To suit |
| Exterior finish / end sealer | To suit |
Build steps
- 1Prepare the gravel baseFree PDF
- 2Set the treated skidsFree PDF
- 3Assemble the floor perimeterFree PDF
- 4Install the floor joistsFree PDF
- 5Lay the floor plywoodFree PDF
- 6Frame the front wallFree PDF
- 7Frame the back wallFree PDF
- 8Frame the side wallsFree PDF
- 9Fit the second top plates
- 10Assemble the roof frameFree PDF
- 11Fit the gable studs
- 12Close the rafter bays
- 13Sheathe the roof
- 14Clad the side walls
- 15Clad the back wall
- 16Clad the front wall
- 17Build and hang the doors
- 18Install the fascia
- 19Fit the gable vents
- 20Install the roof covering
- 21Decorate and finishFree PDF
Quantities are taken from the published plan and are a guide for estimating, not a purchase list. Confirm quantities and sizing against your own site and local requirements.



