
Design visualization. Landscaping and paving are not included. Select the image to enlarge it.
See actual pages from the PDFFree + premium editions
14x20 Lean-to Garden Shed Plans
14x20 Lean-to Garden Shed with dimensioned drawings and illustrated assembly instructions.
Actual footprint: 240 x 168 in (20 x 14 ft)
One design. Two levels of detail.
The free overview explains the sequence. Premium separates the assemblies and adds part schedules and detail drawings.
| Included | Free | Premium |
|---|---|---|
| PDF pages | 15 | 33 |
| Illustrated stages | 10 | 25 |
| Dimensioned assembly views | Included | Included |
| Materials | Overview | Stock + cut schedules |
| Assembly sequence | Grouped overview | Separate stages and checks |
| Roof construction | Combined overview | Framing, sheathing, underlay + shingles |
| Structural / site-specific design | Not included | Not included |
Look inside the plan
These are selected pages from the actual free PDF. Select a page to enlarge it, or download the full free edition above.
Dimensions that match the drawing
- Floor frame
- 240 x 168 in (20 x 14 ft)
- Floor-frame area
- 280 sq ft
- Premium edition
- 33 pages / 25 construction steps
- Free edition
- 15 pages / 10 selected steps
- Revision
- November 9, 2026 / Owner-authorized reviewed PDF release; design review draft
Before you choose
- This is a digital PDF, not a materials kit or a finished product.
- Inch dimensions control; metric conversions are approximate.
- Not an engineered or permit-ready construction set. Foundation design, structural approval and verified load ratings are not included.
- Build time and material budget have not yet been verified in a physical build.
- Payhip handles payment and paid-file delivery. Keep your receipt email to recover your download.
- Personal project use, including sharing with your project tradespeople. No resale or public redistribution of the premium PDF.
What the 14x20 Lean-to Garden Shed takes to build
37 material lines and 25 illustrated build steps, 10 of them in the free PDF. Quantities below are from the plan itself; the cut sizes for every part are in the premium edition.
Structure
| Part | Qty |
|---|---|
| Compacted gravel | 6.95 |
| 1 x 2 (.75 x 1.5 in), mill grooves | 3 |
| 1 x 3 (.75 x 2.5 in) | 13 |
| 1 x 8 (.75 x 7.25 in), rip to fitted fascia | 2 |
| 1 x 8 (.75 x 7.25 in), rip to fitted soffit | 2 |
| 2 x 2 (1.5 x 1.5 in) | 2 |
| 2 x 3 (1.5 x 2.5 in) | 3 |
| 2 x 4 (1.5 x 3.5 in) | 33 |
| 2 x 4 (1.5 x 3.5 in), mill normal seam backing | 3 |
| 2 x 6 (1.5 x 5.5 in) | 14 |
| 2 x 8 (1.5 x 7.25 in) | 18 |
| Actual 1.500 x 1.500 in blank; mill to fitted profile | 1 |
| Actual 3.500 x 3.500 in blank; mill to fitted profile | 3 |
| Actual1.25 x1.5 in muntin blank; mill | 1 |
| Ground-contact 6 x 6 (5.5 x 5.5 in) | 3 |
| Siding 1/2 x 6 in | 78 |
| Slats actual.25 x1.5 in;45-degree grooves | 11 |
| Floor plywood 9/16 in | 10 |
| Ramp plywood 9/16 in | 1 |
| Roof plywood 9/16 in | 12 |
| Wall and door plywood 9/16 in | 21 |
Enclosure and finish
| Part | Qty |
|---|---|
| Separator fabric | 370.7 |
| Weather barrier | 526.9 |
| Low-slope roof system | 329.3 |
| Eave drip edge | 41.167 |
| Door hinges / pulls / bolts | 6 / 2 / 4 |
| Rear weather-rated vents | 2 |
| Window glazing panes | 2 |
| Shutter hardware sets | 4 |
| Window / shutter hinges | 4 / 8 |
| Interior window latches | 2 |
| Half-round gutter | 20.5833 |
| Gutter hangers / end caps | 12 / 2 |
| Downpipe assemblies | 2 |
| Structural fixings / anchors | Pending |
| Compatible screws / nails | Pending |
| Sealants / flashing / exterior finish | Pending |
Build steps
- 1Compacted gravel supportFree PDF
- 2Treated timber skidsFree PDF
- 3Floor perimeterFree PDF
- 4Floor joists and seam backing
- 5Floor plywood
- 6Front wall framingFree PDF
- 7Rear wall framingFree PDF
- 8Side wall framingFree PDF
- 9Continuous wall top plates
- 10Rafters and fitted bearing cutsFree PDF
- 11Gable framing and roof seam backing
- 12Wall plywood
- 13Roof plywoodFree PDF
- 14Weather barrier
- 15Continuous siding courses
- 16Exterior trim, fascia and soffits
- 17Rear wall vents
- 18Door frames, plywood and claddingFree PDF
- 19Door hinges, pulls and bolts
- 20Roof underlay and drip edges
- 21Low-slope roof finishFree PDF
- 22Entrance ramp
- 23Side casement windows
- 24Louvered shutters
- 25Gutter and downpipes
Quantities are taken from the published plan and are a guide for estimating, not a purchase list. Confirm quantities and sizing against your own site and local requirements.



